Attendees will learn the proper methods for conducting pitot-static and transponder tests and inspections. This two-day course offers a regulatory review and an explanation of the proper administrative procedures for completing these critical certifications. Preparing and performing RVSM inspection tasks. ADS-B session covering installation, wiring and return to service review.
Presented by: Don Dominguez of Radioman Avionics
FAA Accepted 8 Hours - Course # C-IND-IM-170106-K-010-005
Acceptance Letter
Course Goals:
- Regulatory Review:91.411 and 91.413; FAR 43, Appendix E and F; FAR 43.9, “Content Form and Disposition of Maintenance and Alterations Records Review.”
- Technical Review: Step-by-step altimeter, pitot/static and transponder inspection training from set up to final documentation; time-saving tips for conducting testing in a logical order; Appendix E and F, “Management Training.”
- Course Materials: Step-by-step procedures, sample checkout forms and FAR reference materials; standard practices; and tips and tricks from experienced industry technicians.
RVSM Session:
- General RVSM information.
- Altimetry system error (ASE).
- Continued Airworthiness Programs.
- The New Part 91 Appendix G.
- AC 91-85B.
- Preparing for your inspection task.
- Performing the inspection task.
- Q & A
- A “Introduction to Operating and Maintaining Aircraft in RVSM Airspace” Handout will be provided to Attendees.
ADS-B Session:
- Demonstration of configuration and test procedures.
- FAR reference material applicable to ADS-B.
- Design and architecture of an ADS-B upgrade.
- Avionics equipment interfacing considerations for ADSB in.
- ADS-B installation and wiring review and design.
- System configurations for ADS-B equipment.
- Conformity inspection of ADS-B equipment.
- Documentation and return to service.
Devin W.
3.8
Great refresher course. Would recommend.
James H.
5
Must attend
Hayden T.
4.8
Definitely recommend for anyone trying to make themselves more valuable to their company.
Bryan P.
5
Great experience and very educational
William R.
4.8
If you haven't attended this class for pitot/static testing you're probably doing it wrong.
Christian B.
4.8
Its a must for those looking to learn about the pitot/static testings.
Cornelius O.
4.2
great class to introduce ADSB procedures to your business.
Cody F.
4.6
Excellent information
Dale S.
4.6
I attended via live simulcast & it was just like being in the classroom. the instructor was very knowledgeable & did a great job to keep the course interesting. I learned a lot & look forward to the next opportunity to attend a course with AEA. An EXTRA thank you to Aaron Ward for going above & Beyond to set up with this training viva web during the Covid pandemic.
Paul W.
4.4
I learned a ton with this presentation and look forward to more opportunities to learn more from you guys in the future. Thank you very much!
Peter O.
5
very informative. A must take class
Javier M.
5
very good class and awesome instructor
Dan B.
4.6
very good information
Hunter M.
5
Please attend this class if you are heavy on Pitot/Static & Transponder inspections/tests!!!
Pedro M.
5
Don't miss this class!
William L.
5
Good class, time was taken to answer all questions
Richard A.
5
The course is great for explaining what is expected from the technician when following the FAR
Robert C.
4
Good investment
Ammar N.
5
Great presentation. Great material and references
Dave H.
4.8
Don provides lots of information very sisinctly. efficent learning
Randy M.
5
Worth the expense. Staff is very knowledgeable & friendly
Roy S.
5
Adequate info to get overall view of pitot static certs
Brandon B.
5
Go for it if you have remedial knowledge of the systems
Isaac G.
4.8
Great class, lots of information
James H.
4.8
Very informative. engaging presentation. Excellent instruction with valuable advice and tech tips.
Frances T.
4.8
This is a great training
Jeremy V.
4.6
Great class. Very informative.
Tom J.
4.8
Useful information relevant to modern installs
Mike B.
5
It helps to have a little background in 411/413
Jeffrey H.
5
Very good presentation, professional atmosphere
Levi S.
4.2
The class is well worth the time and effort if you have not done 91.411, 91.413 tests before.
David B.
5
Well worth the drive for the information they give you. Above and beyond what I expected to gain from this class.
Jayce K.
4.6
Very good and informational
Mark R.
5
Well worth the time and money. Instructor is very knowledgeable
Mike H.
5
I would recommend to attend. Instructor was very knowledgeable and well prepared.
Thomas S.
3.8
Very informative class for ADS-B installation and avionics shop opening
Jessica P.
4.4
It's good on demonstrating how things work
Jon C.
5
Very engaging, focusing on updated and current equipment, and standards. Provides plenty of information about the subject.
Dallas B.
4.6
This course will get you started in the right direction. The right way!
Corey R.
4
Very good information on pitot-static and ADS-B testing.
Clint W.
4.8
Take sooner rather than later
Jack S.
5
Good class
Craig H.
5
Well worth the investment.
Sam B.
5
This course is a great way to prepare to conduct pitot static and transponder tests.
Darion M.
5
Definitely worth the time and the handouts will always be useful
Adrian T.
4.8
Excellent and full of information
Mike R.
5
Very informative and very entertaining instructor
Juan V.
4.6
Really good class to take. A lot of information you will have.
Eric P.
4.2
Good class. Spend your money and take it.
Michael K.
5
If you want to learn Pitot Static and ADS-B this is the place.
Chris H.
5
Worth your time and money!
Robert S.
4.4
Good info
Gary M.
4.4
I would encourage them to attend. My future employees will be attending.
Bryan W.
5
Spend the money and take this class, you won't be let down. This class is beyond informational and covers everything.
Miles K.
5
Very helpful for anyone new to avionics
Marty H.
5
Very informative for the beginner and novice techs
Ruben G.
5
Yes is most for integrity practice
Brian F.
5
It's well worth the 8 hours because you'll definitely learn something new regardless of how long you're been involved with avionics.
Seth I.
5
Great for new technicians or tech with 10 plus years of experience
Nicholas H.
5
Great collection of information from beginner to advanced.
Aaron M.
5
You will feel a lot more confident in performing pitot static and transponder certs.
Chris G.
3.8
Worth the class
Rocco L.
5
Very good class for introduction to XPDR's/Pitot/Static systems but informative enough for recurrencey.
Christina S.
4
Good course to get a better understanding of Pitot/Static testing.
Clay C.
4.8
Lots of info. Definitely worth it.
Mitchell S.
4.4
Very good for people getting started with 91.411/413
Jonathan Z.
5
Very informative for a novice tech
Zach H.
4.4
Great for the guy just starting in pitot/stat world maybe not if you have been doing it a while.
David P.
5
The information is there for you, pay attention and sock it in. Don't be afraid to ask questions.
Ryan F.
3.6
Course covers a lot of info quickly, come with the basics and learn how to be better at your craft.
Max W.
5
Great!!
Colton S.
5
Pay close attention, there is a lot of info in a short time.
John J.
4.8
Solid training for experienced guys or new to the applicable course material.
Charles M.
5
Very informative training course
Andrew B.
5
Very interesting. Come with a little background or you will be lost.
Robbie W.
5
Understanding the importance of pitot static and ADS-B is easy with this class.
Daniel S.
5
Worth the money and time
Shawn B.
4.6
10/10 would attend again
Eric T.
4.8
Well worth time, a bit overwhelming for myself. At this point.
Mark B.
4.8
My first class w/AEA. Really looking forward to tomorrow’s RVSM session...
Grant W.
5
This course is a good course for the basic information about the 91.411/413 process
Jeremy M.
5
Definitely worth attending!
Craig R.
5
Worthwhile
George S.
4.2
Good for people with little to no experience using test sets or doing testing
Carey B.
4.6
Don Dominguez is so up beat and passionate about what he is teaching makes the time go by so fast.
Other Upcoming Courses
AVX-10K & IFR6000/4000 Operations Training
This course is designed to provide maintenance personnel with the knowledge and skills required to operate and configure IFR6000 & IFR4000 to verify and maintain transponder, UAT, TCAS, DME, ILS, VOR, Comms and ELT. Plus a complete review all features and benefits of the AVX-10K Flight Line Test Set with emphasis on testing transponder (Mode S and ADS-B In/Out), UAT, TCAS and DME.
Digital Databus Theory & Analysis
VIRTUAL-LIVE COURSE
As today’s modern airplanes become much more technologically advanced, so must the professionals that maintain them. The advanced avionics and instrumentation systems used in these aircraft rely on various forms of digital databus communication. Understanding digital databus theory is becoming more and more important for avionics technicians, and even A&P mechanics, to effectively test and troubleshoot these highly advanced aircraft systems.
Basic Wiring & Avionics Installation
The Basic Wiring & Avionics Installation course is designed for certificated repairmen, new avionics technicians, aviation maintenance technicians and recent graduates interested in improving or acquiring the skills necessary to perform avionics installations. This three-day seminar employs in-depth theory and hands-on lab exercises to immerse the attendee in the best practices used to plan, manage, and install a general aviation avionics panel. Installation lab includes: Avidyne IFD540 FMS/GPS Navigator, Garmin G5 Electronic Flight Instrument & GAD 29 ARINC 429 data bus module, PS Engineering PMA8000BT Audio Panel and Trans-Cal SSD120-35C-RS-232 Altitude Encoder
Basic Pitot-Static & Transponder Theory, Testing & Troubleshooting
Special Note: Representatives from VIAVI Solutions with the AVX-10K and Tel-Instruments Electronics Corp. with the SDR-OMNI will be in attendance on day 2 to demonstrate operations and answer questions.
The Basic Pitot-Static & Transponder course is designed for entry-level avionics technicians or those looking for basic training on pitot-static & aircraft transponder systems. This two-day course covers the history and theory of operation of pitot-static instruments and transponders, as well as system set-up, hands-on testing, and the troubleshooting skills necessary to perform FAR 91.411 and 91.413 checks.
Aircraft Instrument Systems
VIRTUAL-LIVE COURSE
This course is designed for avionics technicians or apprentices who want to learn more about aircraft instrument systems and better understand their operation, installation considerations, and maintenance to become more effective troubleshooters. From simple mechanical gauges to complex electrical and electronic systems, this course covers nearly every instrument system in an aircraft.
ADS-B Configuration, Testing & Troubleshooting
VIRTUAL-LIVE COURSE
This course is designed for currently employed repair station personnel and installers of ADS-B systems. Approximately 4.8% of all general aviation ADS-B installations are non-compliant based on the FAA’s ADS-B Performance Monitoring System. This course focuses on the proper configuration and testing of ADS-B installations to ensure your installation meets the performance requirements and regulations. Also included are troubleshooting tips and tricks that will help you resolve the common problems found in ADS-B installations.
AET Prep Course & Exam
VIRTUAL-LIVE COURSE
The Aircraft Electronics Technician (AET) Prep Course is a virtual-live class for aviation technicians who want to earn their NCATT AET certification. Students who register in advance will have access to online modules to self-study the AET coursework before attending the one-day virtual-live class. The online modules take approximately two weeks to complete. After the course, students will be fully prepared to take the AET certification exam. The $175 value for the exam is included in the course registration. Upon registration, instructions to access the AET Prep online modules will be emailed to the attendee.
Note: Upon registration, instructions to access the AET Prep online modules will be emailed to the attendee.
Certified Repair Station Training
This weeklong course provides an interactive environment to learn, understand and implement the regulations that govern repair station design and operations.
Avionics Installation for Experimental Aircraft
This course is targeted for the home builder or avionics technician who wants to learn about performing an avionics installation in an experimental aircraft. The class focuses on the Garmin G3X Touch system, and a simplified example harness is constructed as part of the hands-on portion of the class. While the G3X Touch system is the primary focus, the wiring principles and general guidance can be applied to any experimental avionics system. From the do-it-yourselfer to the avionics shop looking to carve out a niche, this class has something for everyone.
Primary Flight Display Installation & Configuration
Technicians will learn how to plan, install, interface, configure and check out an installation of a primary flight display, EHSI and GPS/Nav/Com consisting of dual Garmin GI 275, a Garmin GTN 650 touch screen, and a Garmin GTX 345 transponder. Designed for technicians who have experience with avionics installation practices and are looking for more training integrating common general aviation installations.
Avionics Service and Testing Fundamentals
Build and Keep Your Test Panel & Harness!
This intensive three-day course is designed for experienced avionics technicians seeking comprehensive training in avionics testing, troubleshooting, and service. Led by industry expert Don Dominguez of Radioman Avionics, participants will gain hands-on experience in bench testing LRUs, flight line testing, and aircraft troubleshooting across various avionics systems. From fundamental concepts to advanced techniques, this course covers a wide range of topics including navigation, communication, and transponder equipment service.